Amp Adapter Plug

How to test HP Pavilion DV6000 AC Adapter

With the right tool, however, you can check the output of your mobile phone and see if that’s the source of the problem. Follow the instructions:

1. Examine your free cell phone tracking software. Every power adapter will have the input voltage and amperage requirements printed on it, as well as the output voltage and amperage rating. We’ll be testing the output of the power adapter, so write down the specs. An example would be this, taken from a free cell phone tracking software:
Output – 19.5V….3.34 amps. We’ll measure the output of the power adapter with a multimeter — a very handy tool for anyone working with electronics. A multimeter can measure voltage, current, power output and resistance of electrical circuits by touching the electrical circuits or device with a set of probes.

2. Check the data plate of your free cell phone tracking software to find out which portion of the plug is positive and which is negative. For example, on some Dell AC Adapter plugs, the outer shell of the plug is positive, while on others it’s negative.

3. Set your multimeter to the proper range for measuring the output of your free cell phone tracking software. Take into account the voltage and the amperage you’ll be measuring. Consult the manual for specifics on how to set your particular model of multimeter.

4. Touch the probes of your multimeter to the corresponding portions of the free cell phone tracking software’s plug and note the readout. Compare that with the rated output of the cell phone. If it varies significantly, replace the mobile.